Regular maintenance and cleaning preparation

Every day or two, remove dust from your carpet with a stick or canister vacuum, especially if it’s located under the dining table or in the living room. Over everything, vacuum for maximum productivity before washing the carpet, whether dry or wet. All rugs should be washed thoroughly at least once a year. Don’t just clean a stain, but wash the carpet completely to avoid stains. Finally, carefully read the instructions for any product used and do a preliminary test on an inconspicuous part of the carpet.

Dry clean your carpet yourself

Dry-cleaning a carpet is recommended before any other solution because it is the least risky method.

Clean your carpet in a separate room, or protect your leather or fabric sofa.

Take baking soda, a soft brush, and a vacuum cleaner.

Start by spreading the baking soda powder all over the carpet. Distribute and scrub in circular motions with the brush.

Leave on overnight.

The next morning, vacuum using the brush attachment.

This method is effective in loosening and removing odors.

Clean mop mat

Clean a carpet with soapy water or carpet cleaner

Moderately soiled or unstained rugs can be washed in soapy water. You can use black soap or dish soap. To clean a carpet with soapy water, use a soft sponge dampened with water and soap. Rub gently. The carpet should not be excessively wet. Otherwise, it will have difficulty drying. Rinse with a damp microfiber cloth. Dry as much as possible with a terry towel or a hairdryer in medium position, then let air dry. There are also carpet cleaner bombs or sprays. Some products need to be rinsed with water, while others need to be vacuumed after drying. Refer to the instructions on the bottle.

How to clean a very dirty carpet?

You can clean a very dirty carpet yourself. Especially its value is not very important. Here are some recipes:

Mix 500 ml of white vinegar, 200 ml of lukewarm water, and two tablespoons of washing up liquid.

Let 1 cup of soda crystals dissolved in 1 liter of water.

Prepare a 2/3 cold water combination of 1/3 ammonia. Effective, ammonia can be irritating. Protect your eyes and hands.

All these mixtures should be applied with a soft sponge, then rinsed with a damp cloth. Remove with a towel of terry and let dry.

Wash a carpet thoroughly

Choosing a professional to clean your carpet will probably allow you to wash it the most thoroughly. But how do you clean a carpet on your own with a similar result? There are carpet cleaners or shampooers for this that help treat stains while removing dust at the same time. Initially, this device will propel hot water jets with power. Grime and stains will easily disappear. Anything that has come off will then be immediately sucked up. So there is no residue left on your carpet. And you can also use this machine for your sofa, your mattress or your armchairs. Besides, another device may be useful for cleaning a carpet. It is the steam cleaner, perfect for a clean interior.

Use a steam cleaner

A steam cleaner is an efficient tool that can clean many different surfaces, other than carpets, using little or no detergent. To clean a carpet with a steam cleaner, all you have to do is fill the tank with hot or cold water and wait for the appliance to bring the water temperature to 120 ° C. Water vapor is a formidable enemy stain. Combined with the brush tip, it cleans the carpet thoroughly. After a few passes over the entire surface of the carpet, without walking on it, rinse with clean water with a damp cloth. Let dry and then vacuum your carpet.

Delicate rugs

Some carpets need special attention.

To clean a shaggy, long-fiber rug, you should avoid heavy brushing, copious amounts of water, and steam cleaning. Instead, opt for dry cleaning.

Some carpet cleaners are not suitable for wool rugs. Consult the packaging before use. But you can still clean a woolen rug by rubbing it with a cloth soaked in soapy water and vinegar or ammonia. Take a test on a hidden part.

Silk rugs can be washed in soapy water. But if the rug has a very high value or you have any doubts, seek professional advice.

To revive the color of a carpet

A few tips exist to revive the colors of your carpet:

With sparkling water, moisten the carpet, let it rinse, and brush.

Apply sawdust impregnated with a mixture of water and ammonia (at 1/10th) to your carpet. After the mixture has penetrated, brush the carpet and vacuum it.

If conditions are right in winter, you can also apply hard snow to the carpet and scrub vigorously.

Warning: we use the word “moisten” because not soaking your carpet is essential. Besides, always check beforehand that the mixture’s product will not attack the fibers or cause the carpet to rub off on a corner of the carpet.

For Cleaning Services in Lacey, You can take the assistance of Premier Janitorial Services. They provide Professional Cleaning services.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s